Multi-Diag Access J2534 Version: V2015.01 Pass-Thru OBD2 Device

 Installation multi-diag 1-2015:
1. Before installation to ensure not having connection networks or wifi active
2. Open folder (1) Key on the CD and run the file KeyUpdate. Then confirm and wait for the message successfully installed XXXXXX and OK
3. Start the installation folder (2) 1-2015
If during your installation software request an unlock key 31-xxxxxxxxxx contact us with the key not give you the activation key valid
Select the language it will continue the installation to completion after the message asking do you restart known not to install the following update etc once the last install
Once the message you want to ask not restart known
4. Go to the following folder C: \ ACTIA \ portal and then delete the file WEGT.EXE
5. Once delete this file, open folder (1) Key on the CD and run the file KeyUpdate. Then confirm and wait for the message successfully installed XXXXXX and OK
6. Then install: xs-ime-pt-207p-workshop.exe. You can then restart the pc

Multi-Diag J2534 Functions:

After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):
1. Maintenance
Diagnosis codes from all computers
Reset maintenance interval
Modification of the sewage
Read / erase fault calculators
Maintenance of the particulate filter
  2. Air Conditioning
Diagnosis of cooling electronic
Reading settings cooling circuit,
Test servo actuators
  3. Pollution Control
Diagnosis of the particulate filter
Electronic control of pollutant emissions
Control of the Lambda probe
  4. Liaison to the Ground 
Electronic configuration of the size of tires,
Electronic configuration of tires (winter / summer),
Setting valves tire pressure
Diagnosis and management of shock-driven
Calibration of the sensor angle Driving (initialization of the steering angle)
  5. Body
Implementation of safety airbags (lock / unlock)
Reconfiguration of a new calculator Airbag,
Diagnosis of calculators Airbag,
Rain sensor windshield (reading and erasing fault)
Test panel and activators of lights,
Setting Xenon headlights,
Rear radar
  6. Post-Equipment
Setting up the radio,
Configuration loader CD,
Setting alarms
Configuration of the coupler,
Configuration bicycle loading system
  7. Braking
Diagnosis of calculators ABS, ESP.
Diagnosis and unlock electric brakes.
Flush the brake system.
  8. Motor
Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..)
Programming of injectors
Electronic configuration of the EGR valve
  9. Expert Mode
Diagnosis of advanced computers,
Configuration of comfort functions,
Change the language of the instrument panel,
physical measures (option with a probe - not supplied)
Direct access to all functions of diagnosis.
  V2015.1 Multi Diag Access J2534 System Requirements:
*O.S.: Windows XP; Windows 7 32bit
*CPU: Pentium/Athlon 1.8 GHz or higher
*RAM: 256 MB of system memory
*Hard Drive: 10 GB of available space
*VCI (vehicle communication Interface)
*DVD-ROM
*No Internet, WIFI
*No Antivirus software

JLR SDD2 for All Landrover and Jaguar Diagnostic Tool Features

JLR SDD 2 supports 29 Language:

1. Spanish 2. Slovenia 3. English 4. Greece5. German 6. Danmark 7. Czechic 8. Chinese(Taiwan)9. Chinese(China) 10. Amer English 11. Vietnam 12. Turkey13. Thailand 14. Swedish 15. Russian 16. Portuguese17. Portuguese(Brazil) 18. Poland 19. Norwegian 20. Holand 21. Korea 22. Japanese 23. Italy 24. Indian 25. Hungary 26. French 27.French(Canada) 28. Finland 29. Spanish(Mexico)

JLR SDD2 for All Landrover and Jaguar Features:

1. Self-service equipment development
2. Upgrade Free online
3. Unlimited upgrades, always keep the latest software, and software of dealer shop in sync
4. Provide free jaguar and land rover JLR SDD registration code
5. Free Support:
(1). Reprogramming for all jaguar vehicles
(2). Reprogramming for all landrover vehicles
(3). No password for all jaguar key and smart key
(4). No password for all landrover key and smart key
(5). JLR SDD Register Code is free for you
JLR SDD 2 Functions:

1. JLR Approved device
2. Replacement for JLR SDD2
3. Most cost effective Jaguar pass-thru VCI device
4. Covers CAN, ISO9141, SCP Vehicle Networks
5. 12ft USB Cable as standard included
6. Best Suited for Legacy, Current and Future Vehicles
7. Easy to update for J2534 new functionality updates

ECU Reader for VW, AUDI, SKODA and Jetta

ECU Reader for VW, AUDI, SKODA and Jetta

Top 2 Reasons to Get ECU Reader

1. Language: English
2.Support Vehicle List:VW group(including VW,AUDI,SKODA and Jetta)

Notice. Recommend computer system: Windows XP

VW ECU Reader Description:

VW group(including VW, AUDI, SKODA and Jetta):
all diesel engines with EDC15-original car odometer/mileage reading and programming from motor ECU, immobiliser PIN code reading and programming from motor ECU, immobiliser disable function, EEPROM read/write - everything  by OBDII connector.

AUDI ECU Reader Compatible vehicle list:

AUDI EDC15P:
A2 1.4 TDI  80CV   
A3 1.9 TDI 101CV
A3 1.9 TDI 130CV
A4 1.9 TDI 101CV
A4 1.9 TDI 115CV
A4 1.9 TDI 130CV
A6 1.9 TDI 101CV
A6 1.9 TDI 130CV
AUDI/VW/SKODA SEAT EDC15P
A3 1.9 TDI 101CV
A3 1.9 TDI 130CV
A4 1.9 TDI 101CV
A4 1.9 TDI 115CV
A4 1.9 TDI 130CV
A6 1.9 TDI 101CV
A6 1.9 TDI 130CV
Bora  1.9 PD
Golf4 1.9 PD
Lupo  1.2 / 1.4 PD
New Beeatle 1.9 PD
Passat 1.9 PD
Polo   1.4/1.9 PD
Sharan  1.9 PD

AUDI/VW/SKODA EDC15VP40_29F400
A4 2.5 TDI V6 BOSCH 150 / 180CV E3
A6 2.5 TDI V6 BOSCH 150 / 180CV E3
A8 2.5 TDI V6 BOSCH 150 / 180CV E3

AUDI/VW EDC15VP40_29F800
A4 2.5 TDI V6 BOSCH 163 / 180CV E4
A6 2.5 TDI V6 BOSCH 163 / 180CV E4
A8 2.5 TDI V6 BOSCH 163 / 180CV E4
Passat 2.5 V6  155CV

AUDI/VW/SKODA  EDC15V
A3 1.9 TDI 90CV
A3 1.9 TDI 110CV
A4 1.9 TDI 90CV
A4 1.9 TDI 110CV
A6 1.9 TDI 110CV

AUDI/VW  EDC15Pa
A2 1.4 TDI 75CV

Peugeot, Citroen (PSA):
diesel engines with EDC15C2 computer - PIN code reading/programming,EEPROMread/write, original odometer km reading/erasing from motor ECU - everything  by OBDII connector ;

Opel :
benzin engines with Delco ECU (Motorola HC11F1) - PIN code reading/programming, EEPROM read/write from motor ECU - everything  by OBDII connector ;
benzin engines with Delco ECU (HSFI-2.1 Hybrid) - PIN code reading from motor ECU - everything  by OBDII connector.

AllScanner VCX-PLUS MULTI (Porsche Piwis Tester II V14.35+LAND ROVER JLR V139) with HDD Software

Top 3 Reasons to Get Allscanner VCX-PLUS Multi Scanner:
1. It is most poweful scanner for Porsche, Latest Software Version V14.35
2. Package come with free JLR software V139, which support Jaguar and LandRover after 2005 year.
3. Software keep updating by changing new hdd. You can send old hdd back to us for changing new hdd or buy new hdd directly update.

Notice:
1. Has No Laptop in the Package
2. Software Hard Disk can be used on Panasonic CF-30/Lenovo E49/Lenovo B4320 Laptop

Porsche Piwis II Functions and Descriptions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis II works with the old and latest Porsche cars. It is equipped with the Lenovo or Dell laptop and original software for the test.
Porsche Piwis II can help you diagnose and program all new and old kind of Porsche cars. For example: 911(997)(991)，Boxster/Cayman, (987),
Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis II.
4. Able to work with both old and new Porsche cars up to MY 2013.

Porsche Piwis II Support Systems:
Engine, automatic transmission, air-conditioning, SRS, ABS, ASR, MPL, GM, Original antitheft System, Keyless GO system, OBDII system.

Porsche Piwis II Vehicle Coverage:
1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera

LAND ROVER JLR V139 Software Feature:
USB Diagnostics tool for CAN and ISO9141 vehicles
Supports reprogramming for Jaguar 2005 & up, Land Rover 2005 & up.
Simple packaging with electronics contained inside the cable.
J2534 and J2534-1 compliant device driver
Commercial Range (0 to +70℃)
Dimensions: 3" x 1.75"
Operating Voltage: Bus-powered by USB
Host Interface: Full-speed 12 mbps USB 2.0 with J2534 device driver

AllScanner VCX-PLUS MULTI Scanner (Porsche Piwis Tester II V14.35+Land Rover JLR V139) with Panasonic CF-30 or Lenovo E49 Laptop

1. AllScanner VCX-PLUS MULTI Scanner (Porsche Piwis Tester II V14.35+Land Rover JLR V139) with Lenovo E49 Laptop

2.  AllScanner VCX-PLUS MULTI Scanner (Porsche Piwis Tester II V14.35+Land Rover JLR V139) with Panasonic CF-30 Laptop

AllScanner VCX-PLUS Description:
AllScanner VCX-PLUS MULTI Scanner (Porsche Piwis Tester II V14.35+Land Rover JLR V139) with Panasonic CF-30 or Lenovo E49 Laptop, this is the latest professional tester for Porsche, with powerful functions and full access. Additionally, it support LandRover and Jaguar after 2005 year with support of JLR V139 software.

AllScanner VCX-PLUS MULTI Scanner (Porsche Piwis Tester II V14.0+Land Rover JLR V139) with Panasonic CF-30 or Lenovo E49 Laptop

Highlights of Allscanner VCX-PLUS Multi Scanner:
1. Support Porsche, LandRover, Jaguar 3 in 1.
2. German, British English, American English, French, Italian, Spanish, Japanese, Chinese, Russian, Portuguese, and Dutch.
3. Package come with Panasonic CF-30 or Lenovo E49 Laptop, software preinstalled, directly use, convenient for operation.
4. Software keep updating. Latest software provide, update via Hard disk.
PIWIS II Latest Version: V14.00
LAND ROVER Version: V139
5. Support Online Programming, cost usd220 per time

Notice: When you want to update, have to ship back hdd to us, or you can buy new hdd directly with latest version

Porsche Piwis II Functions and Descriptions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis II works with the old and latest Porsche cars. It is equipped with the Lenovo or Dell laptop and original software for the test. Porsche Piwis II can help you diagnose and program all new and old kind of Porsche cars. For example: 911(997)(991)，Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis II.
4. Able to work with both old and new Porsche cars up to MY 2013.

Porsche Piwis II Support Systems:
Engine, automatic transmission, air-conditioning, SRS, ABS, ASR, MPL, GM, Original antitheft System, Keyless GO system, OBDII system.

Porsche Piwis II Vehicle Coverage:
1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera

Land Rover JLR V139 Software Feature:
USB Diagnostics tool for CAN and ISO9141 vehicles
Supports reprogramming for Jaguar 2005 & up, Land Rover 2005 & up.
Simple packaging with electronics contained inside the cable.
J2534 and J2534-1 compliant device driver
Commercial Range (0 to +70℃)
Dimensions: 3" x 1.75"
Operating Voltage: Bus-powered by USB
Host Interface: Full-speed 12 mbps USB 2.0 with J2534 device driver

BMW ICOM B Module for ICOM A+B+C Diagnostic Tool Sale Alone

ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system. This is BMW ICOM Most module sale alone.

If you brought  A183 or A183-1 before, and yours B Module has been broken. you can buy this one. 

Super iCOM 2015-03 Version Software for BMW ICOM/ICOM A2 Support Update Online Fit All Sata Latops

Super iCOM 2015-03 Version Software for BMW ICOM/ICOM A2 Support Update Online Fit All Sata Latops 

Super iCOM software is 100% fully functions as the dealer workshop use, including BMW Group ISTA, BMW Group ISTA-P, BMW Group ISPI Local path, Super iCOM updater v1.0, Super iCOM SN Reader, iToolRadar, etc.Super iCOM software platform use ISPI NEXT which is the latest platform developed by BMW AG.

Top 6 Reasons to Get Super iCOM 2014-12 Version Software:

1. It is latest software version: 2014.12V.

ISTA-D: 3.46.20.1283

ISTA-P: 3.54.1.001

VIN: 2015.03

2. Software support update online, one year for free. You can use update tool update software on Official Website

3. Super iCom software support all SATA format laptop or computer which has 2GB (Recommend 4GB) memory. You do not have to buy specific laptop, more convenient.

Hardware Requirements:

CPU: Intel Celeron 2.0 and above (i5 Recommend)

RAM: 2Gb and above (4Gb Recommend)

USB: 2.0 and above

4. Super iCom software support multi-languages (with full repair article and Wiring diagram):

ISTA D:French, German, Greek, Italian, Japanese, Korean, Portuguese, Russian, Spanish, Swedish, Thai,Turkish

ISTA-P: German, British English, American English, Swedish ,Spanish ,Italian ,French ,Greek ,Japanese ,Czech ,Korean ,Indonesian ,Chinese ,Taiwanese ,Turkish ,Dutch ,Portuguese, Russian, Thai, Polish

5. Software is preinstalled.Software come with USB Key, no need active, one button click operation, very easy for use.
6. With ICOM, ICOM A2 used, it can be used for printer to print DATA, only need to install printer and driver then you can use it

Note:
The default language is English, if you other language, need to send ut the serials number to us to open it.

Features of Super iCOM 2015.-03:

Upgrade the ISTA-D Software till the latest version 3.46.20.1283

Upgrade the ISTA-D Software till the latest version 3.54.1.001

Rebuild the ISTA-P Launcher to V3.0

Fix the bug of full screen when using ISTA-P

Fix the bug of full screen when using ISTA-D

Fix the ISTA-P Launcher quit error

Fix the dealer information is ISTA-P/ ISTA/D

Add full languages selection options internal ISTA-P

Add brands selection options internal ISTA-P

Add the ISTA-P Launcher start waiting screen

Add the ISTA-P Launcher close waiting screen

Add the Campagna Motors in ISTA-D

Add BMW / BMW Motorcycle / BMW i / BMW Mini / Rolls-Royce / BMW UX selection options internal ISTA-P

Optimize the ISTA-D / ISTA/P starting speed

Optimize the Windows 8.1 first time start configuration speed

Optimize the Windows 8.1 Touch screen / Tablet drivers

Optimize Expert Mode coding / programming speed

Frequent Asked Question about Super iCom:

Q1: How many years of free updating can we enjoy?

Super iCOM provides one year free update online service.

Q2: How to upgrade my software via Internet?

You need use the Super iCOM Updater v3.0 by inputting the serial number and password, after login you can choose the new version to download, the software will be updated and installed automatically.

Q3: What else shall I do before using this item?

Super iCOM software operation is very simple, just insert the SSD / HDD into laptop and power on, and connect the hardware to work with car directly, no need setting anything.

Q4: How can I renew the account if expired?

Account renew is also very simple, just contact with your local dealer, they will provide you the renew ID and password after your payment.

VAG COM KKL 409.1 USB Interface VW/AUDI Diagnostic Cable

 USB KKL VAG-COM 409.1 for VW/AUDI

Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including those with KKL, but without CAN-BUS.

Description:
Primary Function:USB Vag-Com interface cable
OBDII Plug: J1962 16-Pin Male (to Car)
USB Port enabled
Operating Software Compatibility: Windows 98SE / ME / 2000 / NT and XP.
Supports terminal (K) bus communication
Terminal (L) ignition for waking up car computing system (ECU) engine control unit
Has 3 different protocols with same OBD2 connector including ISO/KWP, VPW, PMW.
Refer to your car user manual or check with your car dealer or local mechanic whether your car is compatible with this product.
Compatible Vehicles: Volkswagen, Audi, Skoda, Seat

Support vehicles:
1.Audi Models: 
1)Compatible: A2 / A3 / A4 Cabriolet / A6 / A8 / S2 / S3 / TT
2)Not Compatible: 80 / 100 / 200 / A3(8P) / A4(B7) / A6(C6/4F) / A8 / A8L(D3/4E) / Q7
2.SEAT Models: 
1)Compatible: Alhambra / Altea / Arosa / Cordoba / Ibiza / Inca / Leon MK 1 / Leon MK 2 / Toledo
2)Not Compatible: Altea (5P) / Leon (1P) / Toledo (5P)
3.Skoda: 
1)Compatible: Fabia / Felicia / Octavia MK 1 / Octavia MK 2 / Superb
2)Not Compatible: Octavia (1Z)
4.VW: 
1)Compatible: Beetle / Bora / Caddy / Corrado / Golf MK2 / Golf MK3 / Golf MK4 / Jetta MK3 / Jetta MK4/ Lupo / Passat MK3 / Passat MK4 / Polo MK3 / Polo MK4 / Touran / Touareg / Transporter T3 / Transporter T4 / Transporter T5.
2)Not Compatible: Caddy (2K) / Golf MK5 (1K) / Golf Plus / Jetta MK5 (1K) / Passat MK5 (B6) / Passat MK6 (B6) / Phaeton /

Specification:
Manufacturer Ref: C44D47A6AF72
Catalog Ref: Car accessories, cable fault code, VAG-COM, OBD2 cable

Other Features:
Also supports ISO9141 protocol
No DC or alternate power supply needed, just connect to your car and computer
Work with most Volkswagen and Audi models sold worldwide from 1994 to current year
The CVFG-A11 cable cannot work if your car uses a protocol bus system like VPW, PWM or CAN -bus
The K/L Diagnostic interface cables works on ISO/KWP (Key Word Protocol) that were launched after 1996

Best Quality JLR Mongoose Pro V138 for Jaguar and Land Rover Support Till 2014

JLR Mangoose for Jaguar and Land Rover V138 Newest Version

Please kindy note:

1.Software Version: V138

2.Supported Language: Germany, Russian, French, Dutch, Portuguese, Japanese, Spanish, Italian, English, Simplified Chinese.

3.Update: By CD

4.Support Car Model: Jaguar and Land Rover after 2005

Notice :

1.No Internet Connecting, Or it will make damage to JLR Mangoose!!!

2.Computer System Requires: Win XP only

Description:

Mangoose is a low-cost, high-performance vehicle network interface that connects a laptop directly to the Bus Network via the OBD-II connector. Drew Technologies designed this product to be affordable for Professional Technicians, CarPCs, the aftermarket, and automotive enthusiasts.

Key Features of the Mangoose JLR for Jaguar & Land Rover

J2534 and J2534-1 compliant device driver

Commercial Range (0 to +70℃)

Dimensions: 3" x 1.75"

Operating Voltage: Bus-powered by USB

Host Interface: Full-speed 12 mbps USB 2.0 with J2534 device driver

Lost cost, high performance pass-thru diagnostic tool for use with PC

USB Diagnostics tool for CAN and ISO9141 vehicles

Supports reprogramming for Jaguar 2005& up, Land Rover 2005 & up.

Simple packaging with electronics contained inside the cable.

Bus Protocols Supported By the Mangoose JLR for Jaguar & Land Rover

CAN Bus (details published soon)

More details published soon, will work with IDS 125 software subscription for dealer level diagnostics & module programming. 

Diagnostics with the Mangoose JLR for Jaguar & Land Rover

The Mangoose JLR is a USB pass-thru device that utilizes the SAE J2534-1 API. What this means is that the Mangoose JLR uses a standard communications interface to the vehicle, allowing it to work with 3rd party diagnostic applications. Different diagnostics and data logging applications supported are currently supported by the Mangoose, with more being added all of the time.   NEW!  Jaguar / Land Rover are now supported for dealer level diagnostics & module programming using their software (available here) and the Mangoose JLR. This includes 2005 & Up Jaguar and 2005 & up Land Rover,and requires a subscription to IDS version 125 & up. 

Package List:

1pc x JLR cable

1pc x CD

Installation CD with device driver (J2534 compatible)

The Mangoose JLR includes a J2534 driver and delivers full-speed (12mps) USB 2.0 performance. This version is compatible with late model J2534 compliant Jaguar & Land Rover models. This includes 2005 & Up Jaguar and 2005 & up Land Rover, requires a subscription to IDS version 125 & up.

Mongoose Diagnostics and Reprogramming Interface for Toyota TIS V9.10.038 +honda HDS + Volvo Dice

Mongoose Diagnostics and Reprogramming Interface for Toyota TIS+honda HDS + Volvo Dice

Description:

Mongoose Diagnostics and Reprogramming Interface for Toyota TIS+honda HDS + Volvo Dice is a high perfomance factory diagnose tool for Toyota,Honda and Volvo.

What you have to pay attention when using this tool?
1. Your computer must be windows XP system.
2. Please choose area EUROPEAN when you installing the software. Then it will not ask you for activation code.
Features：
1.       Fully compatible with Toyota TIS, Honda HDS and VOLVO DIDA (New!!!) 
2.       Supports Diagnostics, Reprogramming, Active tests, and key programming 
3.       Supports most 1996 and newer Toyota, Lexus, and Scion vehicles with OBDII/DLC3 diagnostics 
4.       Fully compatible with SAE J2534 
5.       Programmable power supply 
6.       Able to apply 5V-24V to OBD pins 6,9,11,12,13,14 or AUX 2.5mm stereo connector 
7.       Able to apply GND to OBD pins 6,9,11,12,13,14,15 or AUX 2.5mm stereo connecto8.       RGB status LEDs

Supported Protocols
K-Line ISO 9141 
KWP 2000 ISO 14230-4 
SAE J1850 PWM 
SAE J1850 VPW 
CAN 2.0B ISO 11898 
CAN ISO 15765-4

Specifications
Operating Temperature: -20 to 70 C ( -4 to 158 F ) Storage Temperature: -40 to 85 C ( -40 to 185 F ) 
Diagnostic Interface: 16PIN 
USB Interface : USB 2.0 
Consumption: 0.7W 
Dimensions: 95mm(3.74)L x 49mm(1.93)W x 28mm(1.10)H 
Net Weight: 85g 
Gross Weight: 193g

Packing list
1.Mongoose vehicle interface 
2.software CD

VDM UCANDAS WIFI Full System Automotive Diagnostic Tool

VDM UCANDAS WIFI Full System Automotive Diagnostic Tool

Top 9 Reasons To Get VDM Ucandas:

1. Software Version: 3.8
2. Languages: 
English Global Version, Persian, Dutch, Portuguese, Japanese, Thai, Indonesian, Czech, Hungarian, Arabic, Russian Global Version, Finnish, Korean, Turkish, German, French, Spanish, Italian, Vietnamese, Simplified Chinese, Traditional Chinese
(Besides English,you can have another one more languages at most, If you want to add language for your VDM UCANDAS, please provide us serial number and language you need)
3. WIFI and USB Connection: The WIFI direct distance is less than 50M
4. Online Update: you can go to  Website  to update your device. After one year, you need pay about 80USD for each update
5. VDM UCANDAS can support  new computer system: Windows XP, Windows 7, Windows 8. No WP8/Win8 RT

6. Our Customers feedback VDM UCANDAS better than Autocom

7. No need Activation or Register before using.
8. VDM UCANDAS Covers 47 Car Brands:

European Car Models: Audi, Benz, BMW, Citroen, Fiat, Ford EU, Jaguar, Lancia, LandRover, MINI, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Vauxhall, Volvo, VW.

Asia Car Models: Acura, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Subaru, Suzuki, Toyota,Daihatsu,Daewoo,GM

Australia Car Models: Ford AU, Holden

USA Car Models: Chrysler, Ford, GM.,JEEP, SCION

China Car Models: Chery, Geely, GWM


Notice:
1. Dealer Code: 000000 or 111111
2. Please Don't Use VDM UCANDAS on Windows XP SP2 System, Or Wifi Function Can't Work
3. Very Few type of car can do key programming function,such as HONDA, and there is no supported car coverage list for this function
4. There is update version for Russian,German, French, Italian and Portuguese language, you can update to the latest online now for free.

V3.8 Software Update Function description:

1. Add wave graph option for data list.

2. Add record and replay option for data list.

3. Optimized UI text under Chinese-traditional.

3. Optimized SETTING operation under Fixed-window.

WIFI VDM UCANDAS Supported Systems:

ME-Motor electronics, CDI-Common Rail Diesel Injection, ETC-Electronic transmission control, ESM-Electronic selector module, SBC-Sensotronic Brake Control, ESP-Electronic stability program, BAS-Brake assist, Suspension, TPC-Tire pressure monitor, Airbag, CGW-Central gateway, EIS-Electronic ignition switch, OCP-Overhead control panel, UCP-Upper control panel, XALWA-Xenon headlamp, HRA-Headlamp range control, ATA-Anti-theft alarm system, IC-Instrument cluster, ASSYST-Active Service System, SCM-Steering column module, EPS-Electrical power steering, PTS-Parktronic system, EPB-Electric parking brake, COMAND/AUDIO, CD/DVD, TV tuner, CTEL-Cellular telephone, DCM-Door control module, ESA driver-Electric seat adjustment driver,ESA passenger-Electric seat adjustment passenger, AAC-Air conditioning, WSS-Weight sensor system, SVMCM-Special vehicle multifunction control module.

WIFI VDM UCANDAS Covered Function:

Quick Test, Read ECU Info., Read DTCs, Erase DTCs, Clear learning value, Data Stream, Actuations, Read freeze frame data, Read/Write VIN, Basic Reset, Control unit adaptations, Throttle adaptations, Air bleeding, Level calibration, Theft alarm Reset, Key programming, Oil change, Idle speed learning, Idle speed Adjustment, Ignition timing adjustment, Camshaft timing control learning, Maintenance functions, ECU Initial startup, ECU initialization

UCANDAS VDM Introduction

The state-of-art UCANDAS is delicately engineered and built by P&T Electronic Technology Co., a scan tool R&D company based in China. Established in 2009, P&T is now recognized by the automotive aftermarket industry as one of the fastest growing scan tool companies providing the most extensive and best price-performance ratio OEM-level diagnostic products and first-class customer support in the world. The UCANDAS Diagnostic System is ingeniously designed to recreate the functionality of the OEM tools used by automotive manufacturers’ dealers, empowering independent garage shops to provide complete servicing in their own shops, including data stream, reading and clearing of diagnostic trouble codes, component activation and immobilizer key coding, etc.



Hardware Introduction:

VDM UCANDAS Features

Supporting ISO 9141-2, K/L line, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, ISO15765-4 protocols.

High-speed, medium speed and low speed CAN-BUS, Single CAN-BUS diagnosis protocols is supported.

Can check out the year and model of the vehicles automatically and quickly.

All inclusive software coverage - European, American, Asian and Australian prevalent vehicles.

OBDII diagnostic connector has a wide compatibility, which don’t need to replace other connector, during the testing.

Hardware architecture uses new design with multiple protection, interference and stability. Built-in overvoltage protection module is applied, in order to protect scanner and vehicle against accidental damage during checking.

Can work stably in high and low temperature environment, and work well.

Specifications

MCU:  ARM7 processor, 66MHz

Input Voltage:  DC 8-18V

Communication Mode:  USB and WIFI

Storage Temperature:  -30 to 120 C(-22 to 248 F), Relative Humidity: <90%

Operating Temperature:  -30 to 120 C(-22 to 248 F), Relative Humidity: <90%

VDM UCANDAS Package List:

1pc x VDM Main unit with OBDII Cable

1pc x USB Cable

1pc x Carrying Bag
1pc x Software CD

Latest V45.09 CK-100 CK100 Auto Key Programmer Support Till 2014.09

 

Latest V45.09 CK-100 CK100 Auto Key Programmer Support Till 2014.09

Top 4 Reasons to Get CK-100 V45.09:

1. Newest Version: V45.09, some car models support till 2014.09

2. Contain 1024 Token, support to add tokens by changing chips

3. Multi languages: English, Italiano, Deutsch, Francais, Espaniol, Portugues, Turkish

4. Support Pin Code Reader Function for Part of Cars.

Notice: CK-100 V45.09 contains 1024 Token, if you used up your tokens, you can buy AT89C51CC03U NXP Fix Chip to add more tokens.

 

Compare with V45.06:

1. CK100 V45.06 only support cars till 2014.04, while this latest V45.09 CK100 Key Programmer can work for cars till 2014.09

2. CK-100 V45.09 car key programmer Pin Code Service:

1) For HYUNDAI PIN CODE

2) For KIA PIN CODE

3) For NISSAN BCM CODE

4) VAG PIN CODE SYSTEM1 (SYSTEM2,KOSTAL,MEGAMOS/DELPHI)

5) VAG 7-4 PIN CONV (PIN7,DEALER,IMPORTATORE,PIN4,DATA(00/00/2000),EXIT)

6) For GM PIN CODE ECM TYPE 1 (ECM TYPE 2,ECM TYPE 3,ECM TYPE 4,ECM TYPE 5,ECM TYPE 6

7) For CHRYSLER FOBIKCODE

8) For FORD KEYLESS ECODE (KEYLESS ENTRY CODE1,KEYLESS ENTRY CODE2)

 

CK100 v45.09 auto Key Programmer Description:

CK100 Key Programmer is a new generation Car Key programmer, it is the upgrade version of the SBB Key Programmer, new CK100 will replace sbb Key Immobilizer. Increase much more features and functions, it is an powerful, functional and Excellent Quality Car Key programmer.

 

Note: If the result is failure when matching the key, Pls Disconnect OBD-II 16pin adapter with car Diagnostic socket, after 10 seconds connect again, otherwise vehicle immo system may be damaged, and CK-100 will be locked.

 

CK-100 v45.09 Immobiliser Programmer Functions:

Programming new keys

Reading keys from immobilizer's memory

Deactivating keys no longer in the car owner's possession

Operation by means of a menu guided programming

Programming new remote controls

 

V45.09 CK-100 Key Programmer Display:

VAGCOM 12.12 VCDS12.12 HEX USB CAN Interface

 

VAGCOM 12.12 VCDS12.12 HEX USB CAN Interface

Software Version: V12.12

Language: English

Our VAGCOM Cable is demo version, is not a fully activated license. 

Note: When you install Vagcom12.12 software,the system will ask for the password.

password(xp and win7 32): xxxROSSTECH

password(win7 64):        fdsajkl;YYY

Compare with old version vagcom 12.10.3,what is the different?
1. VAGCOM 12.12 Support to the October 2013 Volkswagen Audi cars.
2. VAGCOM12.12 Change the system time automatically, the software is not expired, permanent and effective
3. VCDS 12.12 Automatically updated offline to prevent flash
4. VCDS12.12 With password protection
5. VAG COM 12.12 Support WINDOW xp and Windows 7 32 and 64 bit.


Description:
1. Is fully compatible with all VW, Audi, Seat and Skoda models through the current model year, including models using a direct CAN connection for diagnostics.
2. Has a database of more than 14000 fault-codes and measuring-block texts.
3. Can use the new 7-Digit PIN/SKC codes to match new keys in all immobilizer equipped VW/Audi/Seat/Skoda models.
4. Allows you to view, log, and graph 3 groups of Measuring Blocks at once.
5. Can access all control modules which require proprietary VAG modes running the KWP-2000 protocols (2001+ Teves Mk.60 ABS, numerous 2002+ modules), KWP6000 (CAN) and/or KWP7000 (UDS).

Functions: 
Reset all service indicators (including 2010 and later Audi and VW)
Reads and clears all fault codes
Covers all modules including airbag, ABS, engine, gearbox, central locking etc.
Retracts late model handbrake for pad change
Throttle body adaptions

New Features: 
1. Includes partial support for VW Crafter vans. Communications with all control modules;
functions supported: Control Module ID and Advanced ID, Fault Codes (Read and Clear),
Supported Codes, Security Access, and Adaptation. Other functions such as Measuring Values,
Output Tests, and Basic Settings will be added in future versions.
2. New, more universal Airbag Coding Assistant.
3. New "Upload Debug/Log File" function in Applications Dialog
4. Completely revised and expanded ROD (ODX) Data.
5. New USB Drivers. Now compatible with the latest PCs which use Fresco Logic USB3
chipsets.
6. Refactored DTC routines which interpret DTC data, including enhanced interpretation of status
byte for DTCs in UDS modules.
7. New area to display additional info for Basic Settings.
8. Added data types 0B, 0D, 0F to Generic OBD-II Mode 9.
9. New version of LCode. Thanks to Niels in Denmark!.
10. Revised and expanded Label Files. Thanks to Sebastian!
11.Many other small fixes and improvements, as well as everything which was introduced in

PC Requirements:
A computer running Microsoft Windows. A Laptop, Netbook or Tablet computer is best, but adesktop PC can also be used.
VAG COM12.12 diagnostic cable works with Windows 2000, XP, Vista, and both 32-bit and 64-bit).

Packing List:
1pc x Vag diagtool 12.12 diagnostic interface
1pc x CD Software

VAG Vehicle List

VCDS12.12 cables work with pretty much all VAG vehicles from 1994 to 2013 which have CAN, HEX or Dual K lines including (but not limited to!):

Audi A1  2010+
Audi A2 (8Z) 2000 - 2008
Audi A3/S3 (8L) 1997 - 2008
Audi A3/S3 (8P) 2004+
Audi A3 Cabriolet (8P chassis) 2008+
Audi A4/S4/RS4 (8D) 1995 - 2008
Audi A4/S4/RS4/Cabriolet (8E/8H) 2001+
Audi A4/S4/RS4/Cabriolet (??) 2008+
Audi A4/S4/RS4 ("B7" platform) 2005+
Audi A4/S4/RS4 (B8 platform, 8K chassis) 2008+
Audi A5/Cabriolet 2007+
Audi A5/S5 Cabriolet (8F chassis) 2010+
Audi A5/S5 (B8 platform, 8T chassis) 2008+
Audi 100/A6/S6 (4A) 1991 - 1997
Audi A6/S6/RS6/allroad (4B) 1997 - 2006
Audi A6/S6/RS6 (C6 platform, 4F chassis) 2005+
Audi Q5 2007+
Audi Q5 (8R chassis) 2009+
Audi Q7 (4L) 2006+
Audi A8/S8 (4D) 1994 - 2002+
Audi A8/S8 (4E) 2003+
Audi TT (8N) 1999 - 2007
Audi TT (8J) 2007+
Audi R8 (42 chassis) 2007+
Seat Alhambra (7M) 1996+
Seat Altea (5P) 2004+
Seat Arosa (6B/6H) 1997 - 2004+
Seat Exeo (3R chassis) 2009+
Seat Ibiza / Cordoba (6K) 1993 - 2002+
Seat Ibiza / Cordoba (6L) 2002+
Seat Ibiza (6J chassis) 2008+
Seat Inca (9K) 1996 - 2003
Seat Leon / Toledo (1M) 2000+
Seat Leon (1P) 2006+
Seat Toledo (1L) 1992 - 1999+
Seat Toledo (5P) 2005+
Skoda Fabia (6Y) 2000+
Skoda Fabia (5J) 2005+
Skoda Felicia (6X) 1996 - 2001+
Skoda Octavia I (1U) 1997+
Skoda Octavia II (1Z) 2005+
Skoda Pick Up (67) 1996 - 2001
Skoda Roomster (5J) 2006+
Skoda Superb (3U) 2002+
Skoda Superb (3T chassis) 2008+
Skoda Yeti (5L chassis) 2010+ VW Caddy (9K) 1996 - 2003+
VW Caddy (2K) 2004+
VW Corrado +
VW Crafter (2E) 2006+
VW Eos (1F) 2006+
VW Fox/Spacefox/Sportvan/Suran (5Z) 2005+
VW Gol/Parati/Saveiro (5X) 2000+
VW Golf/Jetta II (19E) 1983 - 1992
VW Golf/Jetta/Vento/Cabriolet III (1H) 1992 - 1998+
VW Golf Cabriolet IV (1E) 1999 - 2002
VW Golf/Jetta/Bora IV (1J/9M) 1998 - 2006
VW Golf/Jetta/Bora V (1K/5M) 2004+
VW Golf/GTI/Jetta (1K/5K chassis) 2010+
VW Golf Variant/Wagon (1K chassis) 2007+
VW Golf Plus (5M chassis) 2005+
VW Golf Mk.6 (5K chassis) 2009+
VW LT (2D) 1996+
VW Lupo (6E/6X) 1999+
VW New Beetle/Cabriolet (1C/1Y/9C) 1999+
VW Passat (31/3A) 1988 - 1994+
VW Passat (3B) 1997 - 2005+
VW Passat (3C) 2006+
VW Passat CC (35/3C chassis) 2008+
VW Phaeton (3D) 2002+
VW Phaeton (3D chassis) ("facelift", MY 2008+) 2007+ 
VW 6N/6N2) 1994 - 2002+  VW 9N) 2002+ 
VW Scirocco  2008+ 
VW Scirocco (13 chassis) 2009+ 
VW Sharan (7M) 1995+ 
VW Tiguan (5N chassis) 2008+
VW Touareg (7L) 2003+ 
VW Touareg (7L6 chassis) ( 2007+ 
VW Touran (1T) 2003+ 
VW Transporter ( 70 ) 1991 - 1996
VW Transporter (7D) 1997 - 2003 
VW Transporter (7H/7J) 2003+

The list above only shows a few of the vehicles that our cables work with, if your VAG vehicle is not listed, do not worry as our cables work with 99% of all VAG vehicles from 1994 to October 2013. If your VAG vehicle has a 16 pin OBDII port our VCDS cables will work. However,  please feel free to contact us if you want to check that your vehicle is compatible.